How much does a pivot door cost in Saudi Arabia? 2026 price guide
Indicative 2026 price ranges for aluminium cladding pivot doors in Saudi Arabia, what pushes the price up or down, and how to get an accurate quote.
“How much is a pivot door?” is one of the questions we hear most. The honest answer is that there is no fixed price — each pivot door is designed and built for its entrance, with its own size, finish and pivot system. But you can understand the likely range and what drives it before asking for a quote, and that is what this guide explains.
In short: the typical market range
Cladding doors are usually priced per square metre of door. In the Saudi market in 2026, full-aluminium cladding doors run roughly SAR 1,000–2,500 per m² depending on specification, and a pivot door adds the pivot system, roughly SAR 2,500–5,000 depending on the door’s weight and the quality of the hardware. Cheaper steel-framed doors faced with cladding start from a few hundred riyals per m², but they differ in weight, rust resistance and insulation.
| Door size (width × height) | Area | Indicative range, whole door |
|---|---|---|
| 1.4 × 3 m | 4.2 m² | SAR 6,700 – 15,500 |
| 1.6 × 4 m | 6.4 m² | SAR 8,900 – 21,000 |
| 1.8 × 6 m | 10.8 m² | SAR 13,800 – 32,000 |
These are indicative ranges for guidance only, compiled from published 2026 Saudi price guides — not a Town Glass quote. They may exclude 15% VAT; the actual price is set after surveying the entrance and agreeing the design.
What decides the price of a pivot door?
- Size: a wider, taller door has more area, and a tall door needs a stiffer frame and a higher-rated pivot.
- Frame material: full aluminium costs more up front than clad steel, but it is lighter, doesn’t rust and lasts longer.
- Insulation: rock wool and polystyrene layers between the tubes improve heat and sound insulation and affect the price.
- Finish: fire-resistant cladding, wood-look finishes, and engraved or inlaid decorative lines.
- The pivot system: its load rating and quality — one of the biggest cost items on large doors.
- Extras: tall glass slits, long pull handles, locks, and decorative extensions around the door.
- Site conditions: the state of the opening and the floor, working height, and the city.
Why prices vary so much between suppliers
“Cladding door” can mean very different products: a steel or aluminium frame, in different thicknesses, insulated or not, with standard or fire-resistant cladding. Two quotes can look alike and be far apart in price. When comparing, ask each quote to state the frame material and thickness, the insulation, the cladding type and thickness, the pivot system, the warranty, and whether installation, delivery and VAT are included.
How to get an accurate quote
- Photograph the entrance from the front, ideally showing its surroundings.
- Measure the rough width and height of the opening.
- Send a design you like or describe the finish you prefer.
- Tell us the city and district.
- Then comes the site survey and a detailed quote.
At Town Glass we build aluminium cladding pivot doors up to 8 m high and 1.8 m wide, with a 10-year workmanship warranty. Send us a photo of your entrance on WhatsApp for a quote based on your own project.
Common questions
Does the price per m² include installation?
It varies by supplier, so always ask whether a quote includes installation, delivery and VAT.
Why does a pivot door cost more than a regular door?
Its leaf is usually larger, and it needs a stiffer frame and a dedicated pivot system to carry the weight and move it smoothly.
Is aluminium more expensive than clad steel?
Usually yes up front, but aluminium is lighter and doesn’t rust, which matters over the long term in the Saudi climate.
